Mincon MR116 RC Hammer (4 1/2″ Remet)

The MR range of RC hammers is designed to perform at the top end of the performance scale compared to other tools on the market. With extensive testing over an 18 months period the MR range of tools offers some very significant benefits over it’s predecessor, the MX range of RC hammers.

Performance improvements show up to 20% increase in production in both grade control and exploration applications vs. the Mincon MX range. As with all Mincon hammers the tools performed extremely well in deep hole drilling in dry applications and where there is a lot of water in the bore hole. With a variable length available on the chuck sleeve the hammer can be easily set up for either dry or wet hole drilling. Set to become the standard by which RC hammers will be measured, the Mincon MR range of tools get the job done.

Key Features and Benefits

• Patented mounting system for fixed internal components.
• An extremely sturdy shank with a short length allows for greater transfer of energy between the piston and bit.
• Variable chuck sleeve lengths for varying drilling conditions.
• Single piece sample tube assembly.
• Specially heat treated sample tubes offer superior wear resistance vs. our competitors.
• Variable sample tube bore sizes allows the contractor greater flexibility in setting up his tool.
• Hardened wear sleeve for optimum wear resistance even in the most abrasive conditions.
• Multi-start threads on backhead and chuck ensure easy coupling/uncoupling of hammer.
• Metal sprayed chuck sleeve and wear sleeve options for greater wear resistance on outside circulation.
• All critical internal components are heat treated under strict control to maximize tool longevity.
• Ease of service with no special assembly or disassembly tools required.